SASE Cyclone Ride-on Floor Scraper

 

 

The SASE Cyclone - The battery powered Cyclone ride-on floor scraper was developed to meet the demands of today’s contractor. The cyclone offers all of the power and production of a propane powered machine, yet it runs quieter with zero emissions and fumes.

Weighing in at 3,200 pounds and travel speeds up to 350 ft per minute the SASE Cyclone will remove virtually all floor covering materials in a single pass. The Cyclone comes standard with both a 110V and 220V charger.

The SASE Cyclone fits through all standard doorways and elevators and is easily transported. The 1,500 lbs of weight and batteries can be removed without the use of a forklift.

All SASE ride-on floor scrapers are equipped with a hydrostatic drive system. This gives the operator complete control of his speed, steering and direction by using a single joystick.

SASE ride-on scrapers are the only machines manufactured with a patented triple blade action:

Action One -- Lowers and raises the blade to the floor
Action Two -- Positions the angle of the blade for optimal removal of a variety of floor coverings.
Action Three -- The integral pivoting blade action keeps th full length of the blade in constant contact with the floor regardless of the machines position. An absolute must have for maximum removal.

 

BATTERY POWERED

Length:
51 in

Width:
24.5 in

Height:
55 in

Weight:
3,200 lbs

Removable Weight:
1,500 lbs

Travel Speed:
350 ft per minute

Manual