SASE Bull 1000 Dust Control Vacuum
Included with vacuum:
100 ft - 6/4 POWER CORD - 50ft - 3 INCH HOSE
The SASE Bull 1000 high air volume and water lift, picks up heavy debris
and concrete dust that many other industrial vacuums leave behind.
This combined with a pulsating filter cleaning system assures non-stop
performance over the life of the vacuum.
The Bull 1000 features a unique 3-stage filtration process:
STAGE 1
An intricate cyclone design separates large debris before it reaches
the primary filters.
STAGE 2
A set of three cylindrical filters will continuously pulse every 30-seconds
to dislodge debris, maximizing performance.
STAGE 3
A HEPA filter is the final stage of filtration; trapping particles
at 99.97%, efficient to .3 microns.
The SASE Bull 1000 is equipped with an auxiliary three-phase, 50 amp
outlet; this enables an additional piece of equipment to be used,
utilizing only one power cord to the source.
Bull 1000
Power Option:
220V / 3Ø
440V / 3Ø
Air Flow:
395 CFM
Weight:
405 lbs
Transport Height:
53 in
Operating Height:
65 in
The SASE Bull 1000 is equipped with an auxiliary three-phase, 50 amp outlet; this enables an additional piece of equipment to be used, utilizing only one power cord to the source.
SASE Company is your
one source for a complete line of surface preparation equipment. Needle Scalers, Scarifiers, Shot Blasters, Diamond Grinders and Dust Control Vacuums.
All of our equipment is sold directly to you, the end user, and supported by a knowledgeable and experienced technical support staff.