Scarifier Steel Cutters

For removal of coatings for surface prep without damaging the underlying surface and road markings removal

 

Item Description ID OD Thickness Fits Machines
615.01.02
615.01.02
Angle Cutter 16mm
(5/8")
41.12mm
(1 5/8")
3.13mm
(1/8" )
SC8E, FR200, FS200, SPT Tool
644.04.06
615.01.04
Small 16mm
(5/8")
41.13mm
(1 5/8")
3.25mm
(1/8" )
FR200, SC8E, FS200

615.01.04644.04.06
Large 15.6mm
(5/8")
50.13mm
(1 31/32")
3.83mm
(9/64")
VA25S, SC10E, CPM10, SPS10

CHS.20.02
Medium tooth 15mm
(19/32”)
50.2mm
(1 31/32”)
3.34mm
(1/8”)
SC10E, VA25S, CPM10, SPS10
CHS.30.01
CHS.30.01
Large tooth 26.4mm
(1 3/64")
75.5mm
(2 31/32")
4.8mm
(3/16" )
TRUCK GRINDERS, VA30S, SC12E
CHS.30.01
CHS.30.02
Large tooth 29.8mm
(1 11/64")
75mm
(2 61/64")
4mm
(5/32" )
TRUCK GRINDERS, VA30S, SC12E

 

 

Scarifier Tungsten Cutters

Used for surface prep and concrete grinding applications for the removal of hard coatings

Item Description ID OD Thickness Fits Machines
615.01.07
615.01.07
Small 5pt 16mm
(5/8" )
40mm
(1 9/16")
6mm
(15/64")
SC8E, FR200, FS200, CPM8, SPS8
615.01.14
615.01.14
Small 6pt 15.2mm
(19/32" )
44mm (1 47/64") 6mm
(15/64")
SC8E, FR200, FS200, CPM8, SPS8
615.08.31
615.08.31
Medium 8pt 18.3mm
(23/32" )
56.37mm
(2 7/32" )
6mm
(15/64")
SC10E, VA25S, CPM10, SPS10
615.08.30
615.08.30
Medium 8pt (special order) 25.2.mm
(63/64”)
55.6mm
(2 3/16”)
6mm
(15/64")
RM320
620.01.13
620.01.13
Large 8pt 30mm
(1 3/16" )
81mm
(3 3/16" )
7.8mm
(5/16" )
VA30S, SC12E
620.01.14
620.01.14
Large 12pt 26mm
(1 1/32" )
80mm
(3 9/64" )
8mm
(5/16" )
Truck Grinder, SC12E, VA30S
630.03.10
630.03.10
Large 12pt 30.16mm
(1 3/16" )
77.79mm
(3 1/16" )
7.94mm
(5/16" )
TRUCK GRINDER
630.03.13
630.03.13
Large 12pt 33.02mm
(1.30" )
80mm
(3 9/64" )
7.84mm
(5/16" )
TRUCK GRINDER

 

 

Scarifier Milling Cutters

Used for the removal of thick to thin mil coatings

 

Item Description ID OD Thickness Fits Machines
615.01.11
615.01.11
Small 16mm
(5/8" )
40
(1 9/16" )
22.23mm
(7/8" )
FR200, SC8E, FS200
644.01.13
644.01.13
Medium 18mm
(23/32" )
57mm
(2 1/4")
20mm
(25/32")
VA25S, SC10E, CPM8, CPM10, SPS10
630.03.08
630.03.08
Large 29.5mm
(1 5/32")
80mm
(3 9/64")
40mm
(1 9/16")
VA30S, SC12E
630.03.09
630.03.09
Large thin 82.55
(1 5/32")
80mm
(3 9/64")
20mm
(4/5")
TRUCK GRINDER, VA30S, SC12E

 

 

Scarifier Parts

 

Item Description Fits Machines
SC.08.510 Flail Shaft, 12mm SC8E, FR200
SC.10.510 Flail Shaft, 9/16" for 10" Ultra Drum 4140 SC10E
633.04.02 Flail Shaft, 12mm VA25S
SC.08.401 Shaft, Hexagonal SC8E
SC.10.401 Shaft, Hexagonal SC10E
SC.12.500 Flail shaft, 20mm for 4 Shaft Drum SC12E, VA30S
SC.08.500 Drum w/o Cutters Sc8E, FR200
SC.08.901 Wheel, Front SC8E, FR200
SC.10.901 Wheel, Front SC10E, FR300, VA25S, VA30S
SC.10.121 Wheel, Rear SC10E, FR300, VA25S, VA30S
SC.08.119 Belt, Toothed SC8, 640, FR200 gas/elec
SC.10.117 Belt, Toothed SC10E, 880 gas, VA25S
SC.12.117 Belt, Toothed SC12E gas, 1040, VA30S
SC.10.156 Pulley, Upper Toothed Gas SC10E, FR250, FR350, VA25S
SC.08.203 Pulley, Lower Toothed SC8E, FR200
SC.10.505 Drum w/o cutters SC10E, VA25S
SC.10.404 Bearing, Driveside SC10E, VA25, VA25S, 6207-2Rs
SC.10.604 Bearing, Endplate SC10E, VA25, VA25S, 6207-2Rs
SC.08.404 Bearing, Driveside SC8E, FR200
SC.08.604 Bearing, Endplate SC8E, FR200, 6006-2Rs
SC.12.404 Bearing, Driveside SC12E, VA30, FR300, FR350, FR250T, 63072
SC.08.604 Bearing, Endplate SC8E, FR200, 6006-2Rs
SC.12.505 Drum w/o Cutters SC12E, VA30S
NB.70.111 Key, Woodruff for Hexagonal Shaft SC8E, FR200
NB.70.115 Key, Woodruff for Hexagonal Shaft SC10E, FR200
SC.12.401 Shaft, Hexagonal SC12E, VA30S
SC.12.407 Key, Woodruff for Hexagonal Shaft SC12E, VA30S
SC.08.803 Wheel, Rear SC8E, FR200
SC.08.803 Wheel, Rear SC10E, VA25S, SC12E, VA30S
SC.12.156 Pulley, Upper for gas models SC12E, VA30S
SC.10.403 Pulley, Lower SC10E, VA25S
SC.12.403 Pulley, Lower SC12E, VA30S
SC.12.121 Pulley, Tightening SC12E, VA30S
SC.12.808 Plate, Joint SC12E, VA30S
NB.20.112 Nut, Shaft SC8E, FR200
NB.30.218 Washer, Safety SC8E, FR200
SC.10.206 Guard, Belt SC8E, FR200
SC.12.118 Guard, Belt SC12E, VA30S